Le Z941W electric flanged gate valve combines a stainless steel gate valve with an electric actuator for remote pipeline isolation. The listed configuration uses a CF8 body and F304 stem, with material and model details shown below.
Electric operation is useful where the valve needs to be opened or closed from a control panel. Le flanged connections suit a bolted pipeline installation, while manual override allows local operation when needed. Ce vanne à vanne is intended for fully open or fully closed service, rather than continuous flow regulation.
Vanne à bride électrique Z941W - Acier inoxydable - 16P25P
Corps de soupape: ASTM A351/A351M CF8
Disque de porte: CF8
Capot de vanne à vanne: ASTM CF8
Tige: ASTM A965/A965M F304
Écrou de manchon de joug: ZCuAl10Fe3
pouce: 2-24''
Diamètre nominal DN: 51-591mm
Indicative FOB Price of Z941W Electric Flanged Gate Valve - Acier inoxydable - 16P25P
-
Z941W, CF8, F304, DN40, pouce 1.5" $457
-
Z941W, CF8, F304, DN50, pouce 2" $564
-
Z941W, CF8, F304, DN65, pouce 2.5" $609
-
Z941W, CF8, F304, DN80, pouce 3" $684
-
Z941W, CF8, F304, DN100, pouce 4" $844
-
Z941W, CF8, F304, DN125, pouce 5" $978
-
Z941W, CF8, F304, DN150, pouce 6" $1190
-
Z941W, CF8, F304, DN200, pouce 8" $1556
-
Z941W, CF8, F304, DN250, pouce 10" $2354
-
Z941W, CF8, F304, DN300, pouce 12" $3013
-
Z941W, CF8, F304, DN350, pouce 14" $4355
-
Z941W, CF8, F304, DN400, pouce 16" $5381
| Modèle de vanne à bride | Pression nominale (Mpa) | Résistance à la pression d'essai(Mpa) | Joint de pression d'essai(Mpa) | Température | Domaine d'utilisation |
|---|---|---|---|---|---|
| Z941W-16P | 1.6 | 2.3 | 1.7 | ≤150 ℃ | eau, gaz, huile, Acide nitrique, etc.. |
| Z941W-25P | 2.5 | 3.7 | 2.7 | ≤150 ℃ | eau, gaz, huile, Acide nitrique, etc.. |
Electric Operation and Project Enquiries
On a pipe rack or an installation operated from a control room, the actuator brings valve isolation into the operating sequence. Include the available supply voltage, control signal and any required position feedback in the enquiry so the actuator can be matched to the project.
The prices above are references for the listed configurations. Request a current quotation for the required valve and actuator assembly, including any control accessories, quantity and delivery arrangement.
Contact Farpro about the Z941W with the required size, quantité et destination. If you are replacing an existing assembly, a valve or actuator nameplate photo gives us a useful starting point for discussing the replacement.