An electric ball valve lets you open or close a line from a control panel rather than at the handwheel. It is useful for plant services, water systems and equipment installations where electrical power is available but compressed air may not be.
Farpro’s Q941F range pairs an electric actuator with a ball valve in stainless steel or WCB cast steel. The models below show the body and trim combinations available for comparison.
Choosing Electric Operation
The motor-driven actuator turns the ball through 90 derajat. For on/off service, it moves between the open and closed positions. Modulating service needs an actuator and valve arrangement designed for that duty; adding an electric motor does not, by itself, make an isolation valve a precision control valve.
An electric assembly is often convenient where a power supply and control wiring are already in place. Supply voltage, control signal, travel time and feedback should match the existing system. The required response to a power failure also needs to be part of the specification.
Compared with pneumatic operation, the practical difference is often the site infrastructure. One installation may have a reliable air network; another may be easier to serve electrically. Compare the whole installation rather than assuming one operator is always more efficient.
See the Q941F specifications for the listed valve materials and technical data.
Jenis Katup Bola Listrik
Katup Bola Listrik – Q941F
The Q941F is an electrically actuated ball valve for remote operation in industrial piping. An electric actuator turns the ball
Adding a Valve to an Existing Control System
A photograph of the existing actuator label or a copy of the control specification can save time when you are replacing an automated valve. It helps us understand how the new assembly needs to connect and operate.
For a new installation, we can discuss the valve and electric operator together. Send us what you already know about the line and controls, and we will help with the next step.
Farpro Valve adalah produsen yang diakui secara global yang berspesialisasi dalam produksi dan distribusi katup berkualitas tinggi. Dengan pengalaman bertahun-tahun dalam penelitian, perkembangan, produksi, dan penjualan katup, kami telah menjadi salah satu produsen katup paling tepercaya di industri.
Kami menawarkan berbagai macam produk katup yang memenuhi standar internasional seperti GB/JB, API, ANSI, AWWA, DARI, DIA, gost, tidak, diantara yang lain. Produk kami tersedia di 12 kategori utama, 200 seri, Dan 4000 ukuran, termasuk katup gerbang, katup globe, katup bola, Katup kupu-kupu, katup periksa, katup diafragma, katup pengurang tekanan, katup sumbat, dan perangkap, diantara yang lain.
Hasil tahunan kami sebesar 80,000 ton merupakan bukti komitmen kami untuk memenuhi permintaan klien kami yang terus meningkat. Valve kami banyak digunakan di berbagai industri seperti perminyakan, petrokimia, bahan kimia, tenaga listrik, metalurgi, pemeliharaan air, konstruksi, farmasi, drainase, dan masih banyak lagi.
Di Farpro Valve, kami bangga dengan kemampuan kami untuk memberikan produk berkualitas tinggi yang memenuhi beragam kebutuhan klien kami. Produk kami dijual di berbagai daerah, termasuk Jerman, Inggris, Perancis, Italia, Brazil, Polandia, dan berakhir 30 negara dan wilayah lain di Eropa, Asia Tengah, Asia Barat, dan seterusnya.