Industrial Valve Types Archives

Professional introduction to knife gate valve

22/05/2024

Knife gate valve is a type of flat gate valve. It adopts a wafer-type connection method, with a shorter valve body and a thinner gate plate. There is a knife-shaped oblique cut at the bottom of the gate, which can … Read more

Karakteristik dan perbedaan antara katup gerbang baji dan katup gerbang datar

07/05/2024

The gate sealing surface of the wedge gate valve is wedge-shaped, that is, it forms a certain angle with the center line of the gate. Push the gate to close through the valve stem. As the valve stem thrust increases, … Read more

Fitur katup gerbang bersegel lembut dan perbedaan dari katup gerbang bersegel keras

07/05/2024

Katup gerbang tertutup lunak terutama digunakan dalam sistem pasokan air dan drainase. Suhu ≤80℃, tekanan nominal ≤PN25, diameter ≤800mm. Bahan badan katup adalah besi cor atau besi ulet, baja tuang atau baja tahan karat. Standar yang diadopsi: CJ/T216-2013 Soft sealed … Read more

Knife gate valve encyclopedia

26/04/2024

Knife gate valves, also known as knife gate valves, are a common valve type. Due to its advantages of simple structure, small size, dan instalasi mudah, it has been widely used in various industrial applications. Let’s introduce its main functions below. Application of knife … Read more

Stainless Steel Gate Valve Specifications

22/04/2024

Stainless steel gate valves are used in a wide variety of industries, termasuk proses kimia, minyak dan gas, obat-obatan, and food and beverage production. Stainless steel gate valves have the characteristics of high durability, corrosion resistance, high temperature and high … Read more

The Crucial Role of Check Valves on Pump Discharges

13/04/202412/04/2024

As a valve expert with years of experience in industrial applications, I often emphasize the importance of incorporating check valves on the discharge side of pumps. This critical valve plays a vital role in ensuring efficient and safe pump operation, … Read more

Katup Diafragma Pneumatik

15/05/2023

Katup diafragma pneumatik adalah jenis katup listrik baru yang menggunakan udara terkompresi sebagai sumber tenaga dan mengubah sinyal pneumatik menjadi sinyal listrik melalui aktuator untuk menggerakkan aksi katup.. Ini memiliki kelebihan struktur sederhana, volume kecil, ringan, dll.. Ini digunakan dalam sistem kontrol otomatis minyak bumi, bahan kimia, industri metalurgi dan lainnya sebagai alat pengatur dan penyadap.

Diaphragm Valve

15/05/202310/05/2023

Diaphragm valves are a unique type of shut-off valve that control the flow of fluids in pipelines by using the movement of the diaphragm on the valve stem to regulate the opening and closing of the valve. The tightness of these valves is highly prominent, and their applications are wide-ranging due to the variety of diaphragm materials that can be used. Let’s take a closer look at the different types of diaphragm valves and their functions.

Extraction Check Valve

25/04/202324/04/2023

Extraction check valves play an important role in preventing backflow and protecting valuable equipment from damage in steam and water lines. These valves are specifically designed for use in extraction lines from steam turbines to feedwater heaters, heating systems, or process equipment. The extraction check valve is engineered for exceptional reliability and can be configured to remain open until closed by a cylinder actuator on signal.

PTFE PFA Lined Ball Valve

25/04/202318/04/2023

PTFE/PFA lined ball valves are corrosion resistant and anti-corrosion valves specially designed for various pipelines containing corrosive media. According to the working conditions of different valves can choose different lining materials. Such as PTFE, PFA and other corrosion-resistant, aging-resistant materials.