Q641F는 자동화된 1/4 회전 작동을 위해 스테인리스 스틸 볼 밸브와 공압 액추에이터를 결합합니다.. It is suited to process lines where valves need to open and close from a control signal.
The listed configuration uses a CF8 body, F304 ball and stem, and PTFE seats. Product specifications and reference prices are shown below.

Q641F 공압 작동식 볼 밸브 - 스테인레스 스틸
몸: CF8
볼 재질: F304
보닛: ASTM A351/A 351M CF8
줄기: F304
Seal & Lined: PTFE
공칭 직경 DN: 15-200mm
Indicative FOB Price of Q641F Pneumatic Actuated Ball Valve - 스테인레스 스틸 16P/25P
-
Q641F, CF8, F304, DN40, 인치 1.5" $232
-
Q641F, CF8, F304, DN50, 인치 2" $247
-
Q641F, CF8, F304, DN65, 인치 2.5" $351
-
Q641F, CF8, F304, DN80, 인치 3" $430
-
Q641F, CF8, F304, DN100, 인치 4" $571
-
Q641F, CF8, F304, DN125, 인치 5" $864
-
Q641F, CF8, F304, DN150, 인치 6" $1002
-
Q641F, CF8, F304, DN200, 인치 8" $1570
기술 데이터
| 모델 | 공칭 압력 (MPa) | 쉘 테스트 (MPa) | 씰 테스트 (MPa) | 나열된 온도 범위 |
|---|---|---|---|---|
| Q641F-16P | 1.6 | 2.4 | 1.8 | -29 에게 150 ℃ |
참고 가격은 참고용입니다.. 필요한 밸브 및 액추에이터 어셈블리에 대한 견적을 받으려면 당사에 문의하십시오..
Pneumatic Operation
The pneumatic actuator converts compressed air into the quarter-turn movement of the ball valve. This allows the valve to form part of an automated on/off sequence without a manual operator at the pipe.
Actuator action and accessories determine how the assembly responds to its control signal and loss of air supply. These requirements can be included when ordering the Q641F for a new or existing control system.
Farpro supplies Q641F pneumatic ball valves for automated process piping. Send us the valve specification and pneumatic control requirements so we can quote the valve and actuator together.