그만큼 Z941W 전기 플랜지 게이트 밸브 combines a stainless steel gate valve with an electric actuator for remote pipeline isolation. The listed configuration uses a CF8 body and F304 stem, with material and model details shown below.
Electric operation is useful where the valve needs to be opened or closed from a control panel. 그만큼 flanged connections suit a bolted pipeline installation, while manual override allows local operation when needed. 이것 게이트 밸브 is intended for fully open or fully closed service, rather than continuous flow regulation.

Z941W 전기 플랜지 게이트 밸브 - 스테인레스 스틸 - 16피 25P
밸브 본체: ASTM A351/A 351M CF8
게이트 디스크: CF8
게이트 밸브 보닛: ASTM CF8
줄기: ASTM A965/A 965M F304
요크 슬리브 너트: ZCuAl10Fe3
인치: 2-24''
공칭 직경 DN: 51-591mm
Indicative FOB Price of Z941W Electric Flanged Gate Valve - 스테인레스 스틸 - 16피 25P
-
Z941W, CF8, F304, DN40, 인치 1.5" $457
-
Z941W, CF8, F304, DN50, 인치 2" $564
-
Z941W, CF8, F304, DN65, 인치 2.5" $609
-
Z941W, CF8, F304, DN80, 인치 3" $684
-
Z941W, CF8, F304, DN100, 인치 4" $844
-
Z941W, CF8, F304, DN125, 인치 5" $978
-
Z941W, CF8, F304, DN150, 인치 6" $1190
-
Z941W, CF8, F304, DN200, 인치 8" $1556
-
Z941W, CF8, F304, DN250, 인치 10" $2354
-
Z941W, CF8, F304, DN300, 인치 12" $3013
-
Z941W, CF8, F304, DN350, 인치 14" $4355
-
Z941W, CF8, F304, DN400, 인치 16" $5381
| 플랜지형 게이트 밸브 모델 | 공칭 압력 (Mpa) | 테스트 압력 강도(Mpa) | 테스트 압력 씰(Mpa) | 온도 | 사용 범위 |
|---|---|---|---|---|---|
| Z941W-16P | 1.6 | 2.3 | 1.7 | 150℃ 이하 | 물, 가스, 기름, 질산, 등. |
| Z941W-25P | 2.5 | 3.7 | 2.7 | 150℃ 이하 | 물, 가스, 기름, 질산, 등. |
Electric Operation and Project Enquiries
On a pipe rack or an installation operated from a control room, the actuator brings valve isolation into the operating sequence. Include the available supply voltage, control signal and any required position feedback in the enquiry so the actuator can be matched to the project.
The prices above are references for the listed configurations. Request a current quotation for the required valve and actuator assembly, including any control accessories, quantity and delivery arrangement.
Contact Farpro about the Z941W with the required size, 수량 및 목적지. If you are replacing an existing assembly, a valve or actuator nameplate photo gives us a useful starting point for discussing the replacement.