Сталеві литі засувки provide isolation for industrial pipelines that need low flow resistance when fully open. Farpro offers wedge gate valve configurations for water, пара, oil and other compatible services.
This page explains how to select the valve family. For individual models, materials and quotation details, view our Z40H, Z41H and Z541 cast steel wedge gate valves.
Типи засувок із литої сталі Farpro

Клапан сталь клапана ножів – Z73
Засувка шиберна лита сталь Z73 широко використовується у всіх видах водопостачання та водовідведення, будівництво, нафта, хімічний, газ (природний газ), їжа, ліки,

Електрична клинова засувка, лита сталь – Z941H
Електрична клинова засувка, також відомий як клиновий затвор з електричним приводом, це тип клапана, який призначений для експлуатації

Литі сталеві клинові засувки – Z40H, Z41H і Z541
Асортимент клинових засувок із литої сталі Farpro включає Z41H, Z40H, Серії Z541 і SZ41H. These valves use a wedge-shaped gate to isolate the pipeline
How Cast Steel Gate Valves Work
The gate moves perpendicular to the flow. Коли повністю відкрито, it retracts from the flow path; коли закрито, it contacts the seats to isolate the pipeline. Standard gate valves are intended for fully open or fully closed service, rather than continuous throttling.
What to Specify Before Ordering
- Valve size and connection standard.
- Design and operating pressure and temperature.
- Рідина, including any corrosive constituents or solids.
- Тіло, trim and sealing materials.
- Manual, gear-operated or actuated operation.
- Required design, inspection and documentation standards.
Nominal pressure or class should be checked with the selected material’s pressure-temperature rating. A class designation is not a single pressure that applies at every temperature.
Застосування засувок із литої сталі Farpro
Cast steel gate valves are commonly considered for process and utility isolation in oil and gas, нафтохімічна, power generation and water systems. The suitable model depends on the complete duty, rather than the industry name alone.
For steam, assess pressure and temperature together. For chemical fluids, evaluate body, обрізка, packing and gasket compatibility. For solids or slurry, consider whether a different valve geometry is more suitable.
Where regular flow adjustment is required, compare an appropriate запірний клапан or control valve instead of using an isolation gate valve partially open.
Технічне обслуговування та ремонт засувок із литої сталі Farpro
Plan inspection around the valve duty and the manufacturer’s maintenance instructions. Check external leakage, stem operation, packing condition and the required operating clearance.
Before opening a valve body or removing it from the pipeline, qualified personnel must isolate the equipment, control hazardous energy, release trapped pressure and verify the safe condition under the site’s approved procedure. Apply lubrication only to the locations and with the products specified for that valve.
For replacement parts or a replacement valve, send the model, identification details, dimensions and service conditions to Farpro. Read our industrial valve replacement guide for procurement and planning considerations.
Choose a Configuration for Your Project
Start with the function and operating conditions, then compare material, pressure class, підключення та експлуатація. A well-defined specification makes quotations easier to compare and helps avoid installation mismatches.
View the cast steel wedge gate valve models or send Farpro your valve list for a project quotation.
Запит на пропозицію клапана
Надішліть свій список клапанів або вимоги до проекту на адресу Клапан Farpro. Включіть рідину, необхідний розмір, робочий і розрахунковий тиск, температура, стандарт підключення, кількість і призначення. Ми можемо обговорити відповідну конфігурацію та цінову пропозицію для вашої програми. Ви можете надсилати креслення та специфікації електронною поштою на адресу service@farprovalve.com.