Producent zaworu zwrotnego

Dom » Przemysłowe zawory zwrotne » Producent zaworu zwrotnego
zawór zwrotny wahadłowy

Swing check valves allow forward flow and close automatically as the flow subsides or reverses. Inside the body, a hinged disc swings away from the seat to open the passage, then returns toward it to restrict backflow.

Farpro supplies cast iron, cast steel and stainless steel swing check valves, including the H44T, H44H and H44W series. The range below brings those constructions together so you can compare materials and installation details.

Swing Check Valve Range

Choosing a Swing Check Valve for the Line

partnerów i aplikacji

Swing check valves are widely used in water, utility and industrial process piping. The hinged mechanism is straightforward, but it still needs enough forward flow for stable disc movement. Sizing only by the pipe diameter can overlook how the valve will behave when the system runs at reduced flow.

At a pump discharge, closing response matters as well as normal operation. Pipe layout, pump shutdown and the rate at which flow changes can influence noise and pressure surges. A swing check valve should therefore be considered as part of the system, rather than as a universal answer to water hammer. Our guide to zawory zwrotne na tłoczeniu pomp discusses those operating conditions in more detail.

Porównaj H44H cast steel model with the cast iron and stainless steel alternatives above. Where space or shutdown response leads to a different design, nasz opłatek I ciche zawory zwrotne offer other arrangements to consider.

Replacing a Swing Check Valve

If the old valve is noisy, leaking or wearing quickly, another valve of the same size may not solve the underlying problem. Tell us what happens during operation, particularly at low flow or when the pump stops.

For a straightforward replacement, the model, body markings and installation dimensions help us identify a suitable option. We can then compare the available valves with your existing pipework.

Farpro Valve to duży światowy producent zaworów zaangażowany w badania, rozwój, produkcja i sprzedaż zaworów.

Nasze standardy produktów obejmują: GB/JB, API, ANSI, AWWA, Z, ON, GOST, NF, itp.

Nasze zawory są dostępne w 12 główne kategorie, 200 seria i 4000 rozmiary, w tym zasuwy, zawory kulowe, zawory kulowe, zawory motylkowe, Sprawdź zawory, zawory membranowe, zawory redukcyjne ciśnienia, zawory grzybkowe, majdan, itp.

Roczna produkcja sięga 80,000 mnóstwo. Wszystkie produkty są szeroko stosowane w przemyśle naftowym, petrochemiczny, chemiczny, energia elektryczna, metalurgia, oszczędzanie wody, budowa, farmaceutyczny, drenaż i inne pola.

Nasze produkty dobrze sprzedają się na rynkach niemieckich, Anglia, Francja, Włochy, Brazylia, Polska i nie tylko 30 krajów i regionów w Europie, Azja centralna, Azja Zachodnia, itp.

    Poproś o wycenę zaworu lub pomoc w wyborze produktu.
    E-mail*:
    Nazwa:
    Twój kraj:
    Telefon / WhatsApp (fakultatywny):
    Twoje wymagania*: