El Q641F combina una válvula de bola de acero inoxidable con un actuador neumático para operación automatizada de un cuarto de vuelta.. It is suited to process lines where valves need to open and close from a control signal.
The listed configuration uses a CF8 body, F304 ball and stem, and PTFE seats. Product specifications and reference prices are shown below.
Válvula de bola accionada neumáticamente Q641F - Acero inoxidable
Cuerpo: CF8
Material de la bola: F304
Capó: ASTM A351/A 351M CF8
Provenir: F304
Seal & Lined: PTFE
Diámetro nominal DN: 15-200milímetros
Indicative FOB Price of Q641F Pneumatic Actuated Ball Valve - Acero inoxidable 16P/25P
-
Q641F, CF8, F304, DN40, pulgada 1.5" $232
-
Q641F, CF8, F304, DN50, pulgada 2" $247
-
Q641F, CF8, F304, DN65, pulgada 2.5" $351
-
Q641F, CF8, F304, DN80, pulgada 3" $430
-
Q641F, CF8, F304, DN100, pulgada 4" $571
-
Q641F, CF8, F304, DN125, pulgada 5" $864
-
Q641F, CF8, F304, DN150, pulgada 6" $1002
-
Q641F, CF8, F304, DN200, pulgada 8" $1570
Datos técnicos
| Modelo | Presión nominal (MPa) | prueba de concha (MPa) | Prueba de sellado (MPa) | Rango de temperatura listado |
|---|---|---|---|---|
| Q641F-16P | 1.6 | 2.4 | 1.8 | -29 a 150 °C |
Los precios de referencia son indicativos.. Contáctenos para una cotización del conjunto de válvula y actuador requerido.
Pneumatic Operation
The pneumatic actuator converts compressed air into the quarter-turn movement of the ball valve. This allows the valve to form part of an automated on/off sequence without a manual operator at the pipe.
Actuator action and accessories determine how the assembly responds to its control signal and loss of air supply. These requirements can be included when ordering the Q641F for a new or existing control system.
Farpro supplies Q641F pneumatic ball valves for automated process piping. Send us the valve specification and pneumatic control requirements so we can quote the valve and actuator together.