El Z941W electric flanged gate valve combines a stainless steel gate valve with an electric actuator for remote pipeline isolation. The listed configuration uses a CF8 body and F304 stem, with material and model details shown below.
Electric operation is useful where the valve needs to be opened or closed from a control panel. El flanged connections suit a bolted pipeline installation, while manual override allows local operation when needed. Este válvula de compuerta is intended for fully open or fully closed service, rather than continuous flow regulation.

Válvula de compuerta con brida eléctrica Z941W - Acero inoxidable - 16P 25P
Cuerpo de la válvula: ASTM A351/A 351M CF8
Disco de puerta: CF8
Capó de válvula de compuerta: ASTM CF8
Provenir: ASTM A965/A 965M F304
Tuerca de manga de yugo: ZCuAl10Fe3
pulgada: 2-24''
Diámetro nominal DN: 51-591milímetros
Indicative FOB Price of Z941W Electric Flanged Gate Valve - Acero inoxidable - 16P 25P
-
Z941W, CF8, F304, DN40, pulgada 1.5" $457
-
Z941W, CF8, F304, DN50, pulgada 2" $564
-
Z941W, CF8, F304, DN65, pulgada 2.5" $609
-
Z941W, CF8, F304, DN80, pulgada 3" $684
-
Z941W, CF8, F304, DN100, pulgada 4" $844
-
Z941W, CF8, F304, DN125, pulgada 5" $978
-
Z941W, CF8, F304, DN150, pulgada 6" $1190
-
Z941W, CF8, F304, DN200, pulgada 8" $1556
-
Z941W, CF8, F304, DN250, pulgada 10" $2354
-
Z941W, CF8, F304, DN300, pulgada 12" $3013
-
Z941W, CF8, F304, DN350, pulgada 14" $4355
-
Z941W, CF8, F304, DN400, pulgada 16" $5381
| Modelo de válvula de compuerta con brida | Presión nominal (MPA) | Fuerza de presión de prueba(MPA) | Sello de presión de prueba(MPA) | Temperatura | Rango de uso |
|---|---|---|---|---|---|
| Z941W-16P | 1.6 | 2.3 | 1.7 | ≤150 ℃ | agua, gas, aceite, Ácido nítrico, etc.. |
| Z941W-25P | 2.5 | 3.7 | 2.7 | ≤150 ℃ | agua, gas, aceite, Ácido nítrico, etc.. |
Electric Operation and Project Enquiries
On a pipe rack or an installation operated from a control room, the actuator brings valve isolation into the operating sequence. Include the available supply voltage, control signal and any required position feedback in the enquiry so the actuator can be matched to the project.
The prices above are references for the listed configurations. Request a current quotation for the required valve and actuator assembly, including any control accessories, quantity and delivery arrangement.
Contact Farpro about the Z941W with the required size, cantidad y destino. If you are replacing an existing assembly, a valve or actuator nameplate photo gives us a useful starting point for discussing the replacement.