Injap Bola Terapung

Rumah » Injap Bebola Perindustrian » Injap Bola Terapung
injap bola terapung

A floating ball valve offers a straightforward way to isolate a process line: turn the handle through a quarter turn to open or close the passage. Its compact construction makes it a familiar choice for plant piping, utility systems and equipment connections.

Farpro supplies cast steel and stainless steel floating ball valves, including the Q41F and Q41Ni series shown below. Browse the models to compare body materials, seats and dimensions for your installation.

How a Floating Ball Valve Seals

The stem turns the ball, while the seats hold it within the body. There are no trunnion supports fixing the ball along its rotational axis. Under line pressure, the ball moves slightly toward the downstream seat to form the shut-off seal.

The simple quarter-turn mechanism works well for local isolation and can also be paired with an actuator. Untuk pengganti, check the connection and installation length as well as the valve size; two valves with the same nominal diameter do not necessarily fit the same space. kami valve replacement guide explains which installation dimensions to record.

Bahan Injap Bebola TerapungStandardMod DigerakkanKaedah pengedapAplikasi dan Kegunaan
besi tuang, keluli tuang, keluli tahan karatAPI, DARI, DIA, KS, DALAM, BS, EAC, NFoperasi manual, penggerak elektrik, digerakkan daripada air/udara/minyakMeterai keras, meterai lembut, meterai satu sisi, meterai dua muka, dan lain-lain.benefisiasi arang batu, pelepasan gangue dan pelepasan sanga di lombong dan loji kuasa,
rawatan kumbahan di bandar, saluran paip industri,
sistem saluran paip profesional untuk makanan, sanitasi, ubat, dan lain-lain.

Jenis Injap Bebola Terapung

Floating or Trunnion-Mounted?

The difference is how the ball is supported. In a floating design, line pressure moves the ball toward its seat. A trunnion-mounted valve supports the ball at its rotational axis and uses the seats to maintain sealing contact.

As size and differential pressure increase, the way those loads reach the seats affects operating torque. That makes ball support an important part of selection, alongside the bore, seat material and operating conditions.

Seat material is a separate choice: floating and trunnion-mounted designs can both use soft or metal seats. The support arrangement alone does not tell you the temperature limit or sealing performance of a particular valve.

For a closer look at the range, compare the cast steel Q41F with the stainless steel and metal-seat models listed above.

Finding the Right Replacement

If you have a valve to replace, a clear photograph and the existing model often make a useful starting point. We can help you work through the differences between the old valve and the available options before preparing a quotation.

Untuk baris baru, send us the valve specification you are working to. You do not need to settle every product detail before getting in touch.

Mengenai Pengeluar Injap Farpro

Teknologi injap pendahuluan

Farpro Valve ialah pengeluar injap global yang besar yang terlibat dalam penyelidikan, pembangunan, pengeluaran dan penjualan injap.

Piawaian produk kami termasuk: GB/JB, API, ANSI, AWWA, DARI, DIA, GOST, NF, dan lain-lain.

Injap kami boleh didapati di 12 kategori utama, 200 siri dan 4000 saiz, termasuk injap pintu, injap glob, injap bola, injap rama-rama, injap periksa, injap diafragma, injap pengurangan tekanan, injap palam, perangkap, dan lain-lain.

Keluaran tahunan mencapai 80,000 tan. Semua produk digunakan secara meluas dalam petroleum, petrokimia, kimia, kuasa elektrik, metalurgi, pemeliharaan air, pembinaan, farmaseutikal, saliran dan ladang lain.

Produk kami terjual dengan baik di pasaran Jerman, England, Perancis, Itali, Brazil, Poland dan lebih daripada 30 negara dan wilayah di Eropah, Asia Tengah, Asia Barat, dan lain-lain.

    Minta sebut harga injap atau sokongan pemilihan produk.
    E-mel*:
    Nama:
    Negara awak:
    telefon / WhatsApp (pilihan):
    Keperluan Anda*: