Injap Gerbang Bebibir Elektrik SS -Z941W

Rumah » Injap Pintu Perindustrian » Injap Pintu Bebibir » Injap Gerbang Bebibir Elektrik SS -Z941W

The Injap pintu bebibir elektrik Z941W combines a stainless steel gate valve with an electric actuator for remote pipeline isolation. The listed configuration uses a CF8 body and F304 stem, with material and model details shown below.

Electric operation is useful where the valve needs to be opened or closed from a control panel. The flanged connections suit a bolted pipeline installation, while manual override allows local operation when needed. ini injap pagar is intended for fully open or fully closed service, rather than continuous flow regulation.

injap pintu bebibir elektrik keluli tahan karat

Injap Pintu Bebibir Elektrik Z941W - Keluli Tahan Karat - 16P 25P

Badan Injap: ASTM A351/A 351M CF8
Cakera Pintu: CF8
Bonet Injap Pintu: ASTM CF8
Batang: ASTM A965/A 965M F304
Kacang Lengan Yoke: ZCuAl10Fe3

inci: 2-24''
Diameter Nominal DN: 51-591mm

Indicative FOB Price of Z941W Electric Flanged Gate Valve - Keluli Tahan Karat - 16P 25P

  • Z941W, CF8, F304, DN40, inci 1.5" $457
  • Z941W, CF8, F304, DN50, inci 2" $564
  • Z941W, CF8, F304, DN65, inci 2.5" $609
  • Z941W, CF8, F304, DN80, inci 3" $684
  • Z941W, CF8, F304, DN100, inci 4" $844
  • Z941W, CF8, F304, DN125, inci 5" $978
  • Z941W, CF8, F304, DN150, inci 6" $1190
  • Z941W, CF8, F304, DN200, inci 8" $1556
  • Z941W, CF8, F304, DN250, inci 10" $2354
  • Z941W, CF8, F304, DN300, inci 12" $3013
  • Z941W, CF8, F304, DN350, inci 14" $4355
  • Z941W, CF8, F304, DN400, inci 16" $5381
Model Injap Pintu BebibirTekanan Nominal (Mpa)Ujian Kekuatan Tekanan(Mpa)Pengedap Tekanan Ujian(Mpa)SuhuJulat penggunaan
Z941W-16P1.62.31.7≤150 ℃air, gas, minyak, Asid nitrik, dan lain-lain.
Z941W-25P2.53.72.7≤150 ℃air, gas, minyak, Asid nitrik, dan lain-lain.

Electric Operation and Project Enquiries

On a pipe rack or an installation operated from a control room, the actuator brings valve isolation into the operating sequence. Include the available supply voltage, control signal and any required position feedback in the enquiry so the actuator can be matched to the project.

The prices above are references for the listed configurations. Request a current quotation for the required valve and actuator assembly, including any control accessories, quantity and delivery arrangement.

Contact Farpro about the Z941W with the required size, kuantiti dan destinasi. If you are replacing an existing assembly, a valve or actuator nameplate photo gives us a useful starting point for discussing the replacement.

    Minta sebut harga injap atau sokongan pemilihan produk.
    E-mel*:
    Nama:
    Negara awak:
    telefon / WhatsApp (pilihan):
    Keperluan Anda*: