Q941F ialah injap bola yang digerakkan secara elektrik untuk operasi jauh dalam paip perindustrian. An electric actuator turns the ball through 90 degrees to open or close the flow path.
The range shown here includes stainless steel and WCB cast steel versions. Each has its own body and trim specification, allowing the material combination to match the application.
Q941F Injap Bebola Elektrik - Keluli Tahan Karat
Badan: CF8
Bahan Bola: F304
Bonet: ASTM A351/A 351M CF8
Batang: F304
Seal & Lined: PTFE
Diameter Nominal DN: 40-200mm
Indicative FOB Price of Q941F Electric Ball Valve - Keluli tahan karat 16p/25p
-
Q941F, CF8, F304, DN40, inci 1.5" $370
-
Q941F, CF8, F304, DN50, inci 2" $398
-
Q941F, CF8, F304, DN65, inci 2.5" $471
-
Q941F, CF8, F304, DN80, inci 3" $537
-
Q941F, CF8, F304, DN100, inci 4" $774
-
Q941F, CF8, F304, DN125, inci 5" $936
-
Q941F, CF8, F304, DN150, inci 6" $1168
-
Q941F, CF8, F304, DN200, inci 8" $1676
Q941F Injap Bebola Elektrik - Keluli Tuang 16C 25
Badan: WCB
Bahan Bola: 201
Bonet: WCB
Batang: 2Cr13
tempat duduk: PTFE
Diameter Nominal DN: 40-250mm
Indicative FOB Price of Q941F Electric Ball Valve - Keluli Tuang 16C 25
-
Q941F, WCB, 201, DN40, inci 1.5" $330
-
Q941F, WCB, 201, DN50, inci 2" $349
-
Q941F, WCB, 201, DN65, inci 2.5" $400
-
Q941F, WCB, 201, DN80, inci 3" $443
-
Q941F, WCB, 201, DN100, inci 4" $662
-
Q941F, WCB, 201, DN125, inci 5" $788
-
Q941F, WCB, 201, DN150, inci 6" $970
-
Q941F, WCB, 201, DN200, inci 8" $1400
-
Q941F, WCB, 201, DN250, inci 10" $1916
The stainless steel version uses a CF8 body with F304 ball and stem. The WCB version has a cast steel body with the trim materials listed in its specification. Both use PTFE seats.
Technical Data
| Model | Tekanan nominal (MPA) | Shell test (MPA) | Seal test (MPA) | Listed temperature range |
|---|---|---|---|---|
| Q941F-16P | 1.6 | 2.4 | 1.8 | -29 ke 150 ° C. |
| Q941F-16C | 1.6 | 2.4 | 1.8 | -29 ke 150 ° C. |
| Q941F-25 | 2.5 | 3.8 | 2.8 | -29 ke 150 ° C. |
Reference prices are indicative. Contact us for a quotation for the required valve and actuator assembly.
Electric Operation
Electric operation is useful where a valve must be controlled remotely and an electrical supply is available at the installation. The actuator turns the ball between open and closed positions, bringing quarter-turn isolation into the control system.
The actuator’s supply voltage, control signal and operating duty form part of the assembly specification. Farpro can quote the valve and actuator together for the required control arrangement.
Farpro supplies Q941F electric ball valves in the material combinations listed above. Include the actuator voltage and control requirements with your valve enquiry so we can quote the complete assembly.