Q941F là van bi điều khiển bằng điện để vận hành từ xa trong đường ống công nghiệp. An electric actuator turns the ball through 90 degrees to open or close the flow path.
The range shown here includes stainless steel and WCB cast steel versions. Each has its own body and trim specification, allowing the material combination to match the application.

Van bi điện Q941F - Thép không gỉ
Thân hình: CF8
Chất liệu bóng: F304
Ca bô: ASTM A351/A 351M CF8
Thân cây: F304
Seal & Lined: PTFE
Đường kính danh nghĩa DN: 40-200mm
Indicative FOB Price of Q941F Electric Ball Valve - Thép không gỉ 16P/25P
-
Q941F, CF8, F304, DN40, inch 1.5" $370
-
Q941F, CF8, F304, DN50, inch 2" $398
-
Q941F, CF8, F304, DN65, inch 2.5" $471
-
Q941F, CF8, F304, DN80, inch 3" $537
-
Q941F, CF8, F304, DN100, inch 4" $774
-
Q941F, CF8, F304, DN125, inch 5" $936
-
Q941F, CF8, F304, DN150, inch 6" $1168
-
Q941F, CF8, F304, DN200, inch 8" $1676

Van bi điện Q941F - Thép đúc 16C 25
Thân hình: WCB
Chất liệu bóng: 201
Ca bô: WCB
Thân cây: 2Cr13
ghế: PTFE
Đường kính danh nghĩa DN: 40-250mm
Indicative FOB Price of Q941F Electric Ball Valve - Thép đúc 16C 25
-
Q941F, WCB, 201, DN40, inch 1.5" $330
-
Q941F, WCB, 201, DN50, inch 2" $349
-
Q941F, WCB, 201, DN65, inch 2.5" $400
-
Q941F, WCB, 201, DN80, inch 3" $443
-
Q941F, WCB, 201, DN100, inch 4" $662
-
Q941F, WCB, 201, DN125, inch 5" $788
-
Q941F, WCB, 201, DN150, inch 6" $970
-
Q941F, WCB, 201, DN200, inch 8" $1400
-
Q941F, WCB, 201, DN250, inch 10" $1916
The stainless steel version uses a CF8 body with F304 ball and stem. The WCB version has a cast steel body with the trim materials listed in its specification. Both use PTFE seats.
Dữ liệu kỹ thuật
| Người mẫu | Áp suất danh nghĩa (MPA) | Kiểm tra vỏ (MPA) | Kiểm tra con dấu (MPA) | Phạm vi nhiệt độ được liệt kê |
|---|---|---|---|---|
| Q941F-16P | 1.6 | 2.4 | 1.8 | -29 ĐẾN 150 °C |
| Q941F-16C | 1.6 | 2.4 | 1.8 | -29 ĐẾN 150 °C |
| Q941F-25 | 2.5 | 3.8 | 2.8 | -29 ĐẾN 150 °C |
Giá tham khảo mang tính chất tham khảo. Liên hệ với chúng tôi để được báo giá cụm van và bộ truyền động cần thiết.
Electric Operation
Electric operation is useful where a valve must be controlled remotely and an electrical supply is available at the installation. The actuator turns the ball between open and closed positions, bringing quarter-turn isolation into the control system.
The actuator’s supply voltage, control signal and operating duty form part of the assembly specification. Farpro can quote the valve and actuator together for the required control arrangement.
Farpro supplies Q941F electric ball valves in the material combinations listed above. Include the actuator voltage and control requirements with your valve enquiry so we can quote the complete assembly.