Industrial Valve Types Archives

Professional introduction to knife gate valve

22/05/2024

Knife gate valve is a type of flat gate valve. It adopts a wafer-type connection method, with a shorter valve body and a thinner gate plate. There is a knife-shaped oblique cut at the bottom of the gate, which can … Đọc tiếp

Characteristics and differences between wedge gate valves and flat gate valves

07/05/2024

The gate sealing surface of the wedge gate valve is wedge-shaped, that is, it forms a certain angle with the center line of the gate. Push the gate to close through the valve stem. As the valve stem thrust increases, … Đọc tiếp

Features of soft sealed gate valves and differences from hard-sealed gate valves

07/05/2024

Soft sealed gate valves are mainly used in water supply and drainage systems. Temperature ≤80℃, nominal pressure ≤PN25, diameter ≤800mm. The valve body material is cast iron or ductile iron, cast steel or stainless steel. Adopted standards: CJ/T216-2013 Soft sealed … Đọc tiếp

Knife gate valve encyclopedia

26/04/2024

Knife gate valves, also known as knife gate valves, are a common valve type. Due to its advantages of simple structure, small size, and easy installation, it has been widely used in various industrial applications. Let’s introduce its main functions below. Application of knife … Đọc tiếp

Stainless Steel Gate Valve Specifications

22/04/2024

Stainless steel gate valves are used in a wide variety of industries, bao gồm cả xử lý hóa học, dầu khí, dược phẩm, and food and beverage production. Stainless steel gate valves have the characteristics of high durability, corrosion resistance, high temperature and high … Đọc tiếp

The Crucial Role of Check Valves on Pump Discharges

13/04/202412/04/2024

As a valve expert with years of experience in industrial applications, I often emphasize the importance of incorporating check valves on the discharge side of pumps. This critical valve plays a vital role in ensuring efficient and safe pump operation, … Đọc tiếp

Van màng khí nén

15/05/2023

Pneumatic diaphragm valve is a new type of electric valve that uses compressed air as the power source and converts the pneumatic signal into an electrical signal through an actuator to drive the valve action. It has the advantages of simple structure, small volume, light weight, vân vân. It use in the automatic control system of petroleum, hóa chất, metallurgical and other industries as a regulating and intercepting device.

Đọc tiếp

Van màng

15/05/202310/05/2023

Diaphragm valves are a unique type of shut-off valve that control the flow of fluids in pipelines by using the movement of the diaphragm on the valve stem to regulate the opening and closing of the valve. The tightness of these valves is highly prominent, and their applications are wide-ranging due to the variety of diaphragm materials that can be used. Let’s take a closer look at the different types of diaphragm valves and their functions.

Đọc tiếp

Extraction Check Valve

25/04/202324/04/2023

Extraction check valves play an important role in preventing backflow and protecting valuable equipment from damage in steam and water lines. These valves are specifically designed for use in extraction lines from steam turbines to feedwater heaters, heating systems, or process equipment. The extraction check valve is engineered for exceptional reliability and can be configured to remain open until closed by a cylinder actuator on signal.

Đọc tiếp

PTFE PFA Lined Ball Valve

25/04/202318/04/2023

PTFE/PFA lined ball valves are corrosion resistant and anti-corrosion valves specially designed for various pipelines containing corrosive media. According to the working conditions of different valves can choose different lining materials. Such as PTFE, PFA and other corrosion-resistant, aging-resistant materials.

Đọc tiếp