Van bi nổi

van bi nổi

A floating ball valve offers a straightforward way to isolate a process line: turn the handle through a quarter turn to open or close the passage. Its compact construction makes it a familiar choice for plant piping, utility systems and equipment connections.

Farpro supplies cast steel and stainless steel floating ball valves, including the Q41F and Q41Ni series shown below. Browse the models to compare body materials, seats and dimensions for your installation.

How a Floating Ball Valve Seals

The stem turns the ball, while the seats hold it within the body. There are no trunnion supports fixing the ball along its rotational axis. Under line pressure, the ball moves slightly toward the downstream seat to form the shut-off seal.

The simple quarter-turn mechanism works well for local isolation and can also be paired with an actuator. Để thay thế, check the connection and installation length as well as the valve size; two valves with the same nominal diameter do not necessarily fit the same space. Của chúng tôi valve replacement guide explains which installation dimensions to record.

Vật liệu van bi nổiTiêu chuẩnChế độ kích hoạtPhương pháp niêm phongỨng dụng và sử dụng
gang thép, thép đúc, thép không gỉAPI, TỪ, ANH TA, KS, TRONG, BS, EAC, NFvận hành thủ công, thiết bị truyền động điện, kích hoạt bằng nước/không khí/dầuCon dấu cứng, con dấu mềm, con dấu một mặt, con dấu hai mặt, vân vân.làm giàu than, xả gangue và xả xỉ trong mỏ và nhà máy điện,
xử lý nước thải ở đô thị, đường ống công nghiệp,
hệ thống đường ống chuyên nghiệp cho thực phẩm, vệ sinh, thuốc, vân vân.

Các loại van bi nổi

Floating or Trunnion-Mounted?

The difference is how the ball is supported. In a floating design, line pressure moves the ball toward its seat. MỘT trunnion-mounted valve supports the ball at its rotational axis and uses the seats to maintain sealing contact.

As size and differential pressure increase, the way those loads reach the seats affects operating torque. That makes ball support an important part of selection, alongside the bore, seat material and operating conditions.

Seat material is a separate choice: floating and trunnion-mounted designs can both use soft or metal seats. The support arrangement alone does not tell you the temperature limit or sealing performance of a particular valve.

For a closer look at the range, so sánh cast steel Q41F with the stainless steel and metal-seat models listed above.

Finding the Right Replacement

If you have a valve to replace, a clear photograph and the existing model often make a useful starting point. We can help you work through the differences between the old valve and the available options before preparing a quotation.

Đối với một dòng mới, send us the valve specification you are working to. You do not need to settle every product detail before getting in touch.

Giới thiệu về nhà sản xuất van Farpro

Công nghệ van trước

Farpro Valve là nhà sản xuất van lớn trên toàn cầu tham gia nghiên cứu, phát triển, sản xuất và kinh doanh van.

Tiêu chuẩn sản phẩm của chúng tôi bao gồm: GB/JB, API, ANSI, AWWA, TỪ, ANH TA, GOST, NF, vân vân.

Van của chúng tôi có sẵn trong 12 danh mục chính, 200 loạt và 4000 kích thước, bao gồm cả van cổng, van cầu, van bi, van bướm, van kiểm tra, van màng, van giảm áp, van cắm, bẫy, vân vân.

Sản lượng hàng năm đạt 80,000 tấn. Tất cả các sản phẩm được sử dụng rộng rãi trong dầu khí, hóa dầu, hóa chất, điện, luyện kim, bảo tồn nước, sự thi công, dược phẩm, thoát nước và các lĩnh vực khác.

Sản phẩm của chúng tôi bán tốt ở thị trường Đức, nước Anh, Pháp, Nước Ý, Brazil, Ba Lan và hơn thế nữa 30 các quốc gia và khu vực ở châu Âu, Trung Á, Tây Á, vân vân.

    Yêu cầu báo giá van hoặc hỗ trợ lựa chọn sản phẩm.
    E-mail*:
    Tên:
    Quốc gia của bạn:
    Điện thoại / WhatsApp (không bắt buộc):
    Yêu cầu của bạn*: