Tihi povratni ventil

Dom » Industrijski povratni ventili » Tihi povratni ventil
tihi povratni ventil

A check valve that closes abruptly can make itself heard throughout a pump system. Silent check designs aim to reduce that closing impact by responding as forward flow falls, before significant reverse velocity develops.

Farpro’s range includes the HC41X silent check valve and the SK300 slow-closing model below. They use different closing arrangements, so the better choice depends on the pump duty and the behaviour of the pipeline.

Closing Response in Water and Pump Systems

A spring-assisted silent check uses a short disc movement and spring force to help return the disc toward its seat as flow decreases. A slow-closing valve uses a different approach to the closing sequence. The two should not be treated as interchangeable simply because both are intended to reduce closing disturbance.

These valves are considered for water supply, circulation and pump installations where reverse flow, noise or pressure transients need attention. The pump’s operating range, pipe profile and shutdown conditions help establish which response is appropriate.

No check valve can guarantee a surge-free system on its own. For long rising mains or complex pumping stations, hydraulic assessment may be needed alongside valve selection. Naše vodilica nepovratnog ventila za ispuštanje pumpe explains why flow conditions matter.

Silent and Slow-Closing Check Valves

Compare these models with Swing Provjerite ventile or browse the complete check valve range.

When the Pump Stops

If you are investigating a closing noise or pressure surge, tell us when it happens: during a normal stop, a power failure or a change between pumps. That is often more useful than describing the valve as simply “noisy”.

For a new installation, share the pump duty and pipeline arrangement. We can help compare the available valve designs and their place in the system.

Farpro Valve veliki je svjetski proizvođač ventila koji se bavi istraživanjem, razvoj, proizvodnja i prodaja ventila.

Naši standardi proizvoda uključuju: GB/JB, API, ANSI, AWWA, IZ, ON, GOST, NF, itd.

Naši ventili dostupni su u 12 glavne kategorije, 200 serije i 4000 veličine, uključujući zasune, kuglasti ventili, kuglasti ventili, leptir ventili, povratni ventili, membranski ventili, ventili za smanjenje tlaka, čep ventili, zamke, itd.

Godišnja proizvodnja doseže 80,000 tona. Svi proizvodi imaju široku primjenu u nafti, petrokemijski, kemijski, električna energija, metalurgija, očuvanje vode, konstrukcija, farmaceutski, odvodnje i dr. polja.

Naši proizvodi dobro se prodaju na tržištima Njemačke, Engleska, Francuska, Italija, Brazil, Poljska i više od 30 zemljama i regijama u Europi, Srednja Azija, Zapadna Azija, itd.

    Zatražite ponudu ventila ili podršku pri odabiru proizvoda.
    Email*:
    Ime:
    Tvoja zemlja:
    Telefon / Što ima (neobavezan):
    Vaši zahtjevi*: