Swing check valves are a popular type of check valve used in various industrial applications. They are designed with a hinged disk that swings open when the fluid flows in one direction and closes when the fluid flows in the opposite direction. This disk is typically made of metal or plastic and can be coated with a material that resists corrosion or wear.
One of the main advantages of swing check valves is their simplicity of design, which makes them less expensive and easier to maintain than other types of check valves. Dodatno, the swinging disk design allows for low-pressure drops and minimal backflow resistance, making them suitable for low to moderate flow rates.
Types of Swing Check Valves
Swing Check Valve Stainless Steel – API H44W
The opening and closing parts of the H44W swing check valve stainless steel is a circular valve, which relies on
Swing Check Valve Cast Steel – ANSI API H44H
H44H swing check valve is suitable on the nitrk acid type pipelie does prevents the medium adversecurrent to open one
Swing Flanged Check Valve Cast Iron – H44T
H44T swing check valve is a type of check valve that allows flow in one direction and prevents backflow in
Application of Swing Check Valve
Swing check valves are commonly used in water and wastewater treatment, kemijska obrada, oil and gas refining, and other industrial applications where back pressure is minimal. Međutim, they may not be suitable for applications with high back pressure or where a tight seal is required.
Sve u svemu, swing check valves are an essential component in many industrial applications where the prevention of backflow is critical to maintaining safety and operational efficiency.
Farpro Valve offer a wide range of swing check valves that are designed to meet the specific needs of your application. Our swing check valves are made with high-quality materials and are rigorously tested to ensure optimal performance and reliability.
Uvjerenja Farpro ventila
Vjerujemo da su ozbiljno tretiranje svakog proizvoda i iskreno primanje svakog kupca najvažnije stvari za Farpro Valve.
Naše check valve products do not necessarily have the lowest price, ali svakako ćemo biti najpošteniji proizvođač i vaš najvjerniji partner.
Farpro Valve veliki je svjetski proizvođač ventila koji se bavi istraživanjem, razvoj, proizvodnja i prodaja ventila.
Naši standardi proizvoda uključuju: GB/JB, API, ANSI, AWWA, IZ, ON, GOST, NF, itd.
Naši ventili dostupni su u 12 glavne kategorije, 200 serije i 4000 veličine, uključujući zasune, kuglasti ventili, kuglasti ventili, leptir ventili, povratni ventili, membranski ventili, ventili za smanjenje tlaka, čep ventili, zamke, itd.
Godišnja proizvodnja doseže 80,000 tona. Svi proizvodi imaju široku primjenu u nafti, petrokemijski, kemijski, električna energija, metalurgija, očuvanje vode, konstrukcija, farmaceutski, odvodnje i dr. polja.
Naši proizvodi dobro se prodaju na tržištima Njemačke, Engleska, Francuska, Italija, Brazil, Poljska i više od 30 zemljama i regijama u Europi, Srednja Azija, Zapadna Azija, itd.