Z Type Globe Valve Stainless SteelAPI J41W

Dom » Vrste kuglastog ventila » Globusni ventil tipa Z » Z Type Globe Valve Stainless SteelAPI J41W

Stainless steel Z type globe valve structure is simpler than the gate valve, manufacturing and maintenance are more convenient. This structure is not easy to wear and abrasion, good sealing, no relative sliding between the valve flap and body sealing surface when opening and closing, so wear and abrasion are not serious, good sealing performance, long service life.

It has a large opening and closing torque, opening and closing more laborious, opening and closing time principal. The fluid resistance of the valve is large, because the medium channel inside the valve is more tortuous, the fluid resistance is large, and the power consumption is large.

api globe valve ss stainless steel

J41W Z Type Globe Valve - API Stainless Steel

Globe Body: CF8
Disc: CF8
Globe Valve Bonnet: CF8
Stem: F304
Yoke Sleeve Nut: ZCuAl1OFe3

inch: 1-8''
Nominal Diameter DN: 40-303.4mm

Globe Valve Model (API)Nominal Pressure (Mpa)Test Pressure Strength(Mpa)Test Pressure Seal(Mpa)TemperatureRange of use
J41W-150LB2.03.02.2-29~150 ℃water, gas, oil, Nitric acid, itd.

Features of stainless steel globe valve

Stainless steel globe valve is a widely used valve, it is widely popular because of the opening and closing process between the sealing surface friction is small, more durable, opening height is not large, easy to manufacture, easy maintenance, not only for low and medium pressure, but also for high pressure.

The closing principle of the globe valve is that the pressure of the valve bar makes the sealing surface of the valve flap and the sealing surface of the valve seat close together to stop the flow of media.

The shut-off valve allows the medium to flow in one direction only and is directional when installed. The structure of the globe valve is longer than the gate valve, while the fluid resistance is high, and the sealing reliability is not strong in long-term operation.

Uvjerenja Farpro ventila

farpro valve manufacturer supplier

Vjerujemo da su ozbiljno tretiranje svakog proizvoda i iskreno primanje svakog kupca najvažnije stvari za Farpro Valve.

Naše Z type globe valves nemaju nužno najnižu cijenu, ali svakako ćemo biti najpošteniji proizvođač i vaš najvjerniji partner.

farpro valve manufacturer factory

Farpro Valve is a globally recognized manufacturer that specializes in the production and distribution of high-quality valves. With years of experience in research, razvoj, proizvodnja, i prodaja ventila, we have become one of the most trusted valve manufacturers in the industry.

We offer a wide range of valve products that meet international standards such as GB/JB, API, ANSI, AWWA, IZ, ON, GOST, NF, između ostalih. Our products are available in 12 glavne kategorije, 200 niz, i 4000 veličine, uključujući zasune, kuglasti ventili, kuglasti ventili, leptir ventili, povratni ventili, membranski ventili, ventili za smanjenje tlaka, čep ventili, and traps, između ostalih.

Our annual output of 80,000 tons is a testament to our commitment to meeting the ever-increasing demands of our clients. Naši ventili imaju široku primjenu u raznim industrijama kao što je naftna, petrokemijski, kemijski, električna energija, metalurgija, očuvanje vode, konstrukcija, farmaceutski, drenaža, and many more.

U Farpro Valveu, we pride ourselves on our ability to deliver high-quality products that meet the diverse needs of our clients. Our products are sold in various regions, uključujući Njemačku, Engleska, Francuska, Italija, Brazil, Poljska, I gotovo 30 other countries and regions in Europe, Srednja Azija, Zapadna Azija, and beyond.

    Hvala što ste Farpro Valve smatrali svojim željenim partnerom.

    Email*:

    Ime*:

    Tvoja zemlja:

    Tel*:

    Informacija*: