Van đường kính lớn: Cổng Bướm Kiểm tra bóng

Large diameter valves need to do more than match the pipe size. The required duty, operating space and valve weight can make two apparently similar options very different purchases. This guide introduces the main valve types and the details worth checking before asking for a quotation.

Các hệ thống đường ống công nghiệp thường yêu cầu sử dụng các van có đường kính lớn. Trong khi các van bóng nhỏ hơn thường được nhìn thấy và tương đối rẻ, Động lực thay đổi đáng kể khi nói đến các van có thông số kỹ thuật lớn hơn. Trong thực tế, Các van như vậy có thể được coi là toàn bộ hệ thống hoặc thiết bị.

Một ví dụ như vậy là van bóng áp suất cao do chất lỏng DN250 được mô tả trong hình trên. Van đặc biệt này được điều khiển bởi một hệ thống thủy lực riêng biệt, Sử dụng cơ chế xi lanh lỏng và pinion chất lỏng. Nó cũng kết hợp điều khiển điện đơn giản cho hoạt động cục bộ và từ xa. Van có kích thước này tìm thấy ứng dụng rộng rãi trong các ngành công nghiệp như dầu, khí ga, năng lượng nhiệt, và hóa chất, trong đó chức năng chuyển đổi có vẻ cơ bản của họ đóng vai trò quan trọng. Kể từ đây, An toàn và độ tin cậy trở thành mục tiêu tối quan trọng cho các van như vậy.

Chuyển đổi van, bao gồm cả van bi, van bướm, và van cổng, thường được sử dụng trong các hệ thống đường ống.

Van bóng đường kính lớn

Van bóng được biết đến với các đặc tính niêm phong tuyệt vời và độ tin cậy cao. Tuy nhiên, Trong điều kiện áp suất cao, Mô -men xoắn cần thiết để vận hành các van bóng có thể là đáng kể và không nên bỏ qua. Hơn thế nữa, Kích thước lớn hơn của chúng đòi hỏi phải xem xét liên quan đến kích thước và trọng lượng kết nối.

Van bướm đường kính lớn

Van bướm, Mặt khác, nhỏ hơn và nhẹ hơn so với van bóng. Tuy nhiên, Đảm bảo niêm phong thích hợp trở nên quan trọng hơn với các van bướm, Làm cho chúng phù hợp với môi trường áp suất hoặc thông gió thấp. Với những tiến bộ như thiết kế bướm lập dị ba, Những van này cũng đang tìm đường vào các ứng dụng áp suất cao.

Large Diameter Gate Valve

A gate valve uses a gate that moves across the flow path and is normally selected for fully open or fully closed isolation. For a large unit, check the space needed for the stem and operator, the proposed seat and body materials, and the effort or actuator output required to operate it. Pressure capability must be established for the specified valve, not inferred from its size.

Khi nói đến điều chỉnh dòng chảy, Hai loại van chính thường được sử dụng: điều chỉnh van và van giảm áp.

Van điều chỉnh

A regulating valve is selected to control a process variable such as flow or pressure. Its suitability depends on the required flow range, pressure difference and control arrangement. For a large line, nominal pipe size alone is not a sufficient basis for sizing the control valve. Keep this duty separate from a valve purchased only for isolation.

Van giảm áp

A pressure reducing valve regulates downstream pressure. Direct-acting and pilot-operated designs are available, and the sensing arrangement depends on the design. Compare the inlet pressure range, required outlet pressure, flow range and suitability for the medium rather than assuming all regulators have the same adjustment range.

The absence of an external sensing tube does not mean that a pressure reducing valve cannot regulate downstream pressure: some designs sense pressure internally. Follow the selected model’s sensing and installation requirements. Choose between regulator designs using the service conditions and required pressure-control performance.

Tóm tắt các van đường kính lớn từ Farpro

Kích thước của chúng, sự thi công, và các đặc điểm hiệu suất làm cho chúng rất quan trọng để kiểm soát chất lỏng hiệu quả và hoạt động đáng tin cậy. Chọn van đường kính lớn thích hợp cho một ứng dụng cụ thể đòi hỏi phải xem xét cẩn thận các yếu tố như kích thước, nguyên vật liệu, Động vật, và các tiêu chuẩn ngành để đảm bảo hiệu suất tối ưu và độ tin cậy lâu dài.

Tóm lại là, Thế giới của các van rộng lớn và đa dạng, Phục vụ cho một loạt các nhu cầu công nghiệp. Hiểu được sự khác biệt giữa các loại van khác nhau và các ứng dụng cụ thể của chúng là rất quan trọng trong việc lựa chọn van phù hợp với các yêu cầu cụ thể của bạn.

Large Diameter Check Valve

A check valve serves a different purpose from the isolation valves above: it helps prevent reverse flow. For a large pump discharge or pipeline, compare the proposed valve against the flow conditions, installation orientation and system requirements during pump stopping. Do not assume that a particular check valve will eliminate surge simply because it is described as slow-closing or non-slam.

Before Comparing Large Diameter Valve Quotations

Start with the job the valve needs to do: isolate a line, prevent reverse flow or control a process condition. Then give each supplier the same starting information:

  • Dịch, operating and design pressure and temperature, and nominal size.
  • Chuẩn kết nối, installed length and available space for the operator.
  • Required body and seat materials, operating method and any control accessories.
  • Quantity, inspection requirements, delivery destination and the proposed delivery basis.

For a large assembly, ask for the quoted weight and handling requirements as well. Access for lifting, installation and future maintenance can affect the practical choice even when the valve meets the pressure specification.

Browse Farpro’s van cổng, van bi Và van kiểm tra to identify the relevant family. If you are comparing ball valve offers, của chúng tôi full port versus reduced port guide explains why matching connection sizes can still leave different flow openings.

Send Farpro your valve list or a brief description of the requirement. An existing model or readable nameplate photo is useful for a replacement. If part of the specification remains open, mark it for discussion so an alternative is not mistaken for an exact match.