کاسٹ اسٹیل گیٹ والو

گھر » صنعتی گیٹ والوز » کاسٹ اسٹیل گیٹ والو
کاسٹ اسٹیل گیٹ والوز فارپرو یوانڈا

کاسٹ اسٹیل گیٹ والوز provide isolation for industrial pipelines that need low flow resistance when fully open. Farpro offers wedge gate valve configurations for water, بھاپ, oil and other compatible services.

This page explains how to select the valve family. For individual models, materials and quotation details, view our Z40H, Z41H and Z541 cast steel wedge gate valves.

فرپرو کاسٹ اسٹیل گیٹ والو کی اقسام

How Cast Steel Gate Valves Work

The gate moves perpendicular to the flow. جب مکمل طور پر کھلا ہو, it retracts from the flow path; جب بند ہو, it contacts the seats to isolate the pipeline. Standard gate valves are intended for fully open or fully closed service, rather than continuous throttling.

What to Specify Before Ordering

  • Valve size and connection standard.
  • Design and operating pressure and temperature.
  • Fluid, including any corrosive constituents or solids.
  • جسم, trim and sealing materials.
  • دستی, gear-operated or actuated operation.
  • Required design, inspection and documentation standards.

Nominal pressure or class should be checked with the selected material’s pressure-temperature rating. A class designation is not a single pressure that applies at every temperature.

فرپرو کاسٹ اسٹیل گیٹ والوز کی درخواستیں

شراکت دار اور ایپلی کیشنز

Cast steel gate valves are commonly considered for process and utility isolation in oil and gas, پیٹرو کیمیکل, power generation and water systems. The suitable model depends on the complete duty, rather than the industry name alone.

For steam, assess pressure and temperature together. For chemical fluids, evaluate body, تراشنا, packing and gasket compatibility. For solids or slurry, consider whether a different valve geometry is more suitable.

Where regular flow adjustment is required, compare an appropriate گلوب والو or control valve instead of using an isolation gate valve partially open.

فارپرو کاسٹ اسٹیل گیٹ والوز کی بحالی اور مرمت

ایڈوانس والو ٹکنالوجی

Plan inspection around the valve duty and the manufacturer’s maintenance instructions. Check external leakage, stem operation, packing condition and the required operating clearance.

Before opening a valve body or removing it from the pipeline, qualified personnel must isolate the equipment, control hazardous energy, release trapped pressure and verify the safe condition under the site’s approved procedure. Apply lubrication only to the locations and with the products specified for that valve.

For replacement parts or a replacement valve, send the model, identification details, dimensions and service conditions to Farpro. Read our industrial valve replacement guide for procurement and planning considerations.

Choose a Configuration for Your Project

Start with the function and operating conditions, then compare material, دباؤ کی کلاس, کنکشن اور آپریشن. A well-defined specification makes quotations easier to compare and helps avoid installation mismatches.

View the cast steel wedge gate valve models or send Farpro your valve list for a project quotation.

والو کوٹیشن کی درخواست کریں۔

اپنی والو کی فہرست یا پروجیکٹ کی ضروریات کو بھیجیں۔ فارپرو والو. سیال شامل کریں۔, مطلوبہ سائز, آپریٹنگ اور ڈیزائن دباؤ, درجہ حرارت, کنکشن کا معیار, مقدار اور منزل. ہم آپ کی درخواست کے لیے مناسب ترتیب اور کوٹیشن پر تبادلہ خیال کر سکتے ہیں۔. آپ ڈرائنگ اور وضاحتیں ای میل کر سکتے ہیں۔ service@farprovalve.com.

    والو کوٹیشن یا پروڈکٹ سلیکشن سپورٹ کی درخواست کریں۔.
    ای میل*:
    نام:
    آپ کا ملک:
    فون / واٹس ایپ (اختیاری):
    آپ کی ضروریات*: