Farpro Yuanda supplies ball valves for process piping, water systems and oil and gas service. Our range includes floating and trunnion-mounted designs, with manual, pneumatic and electric operation.
The quarter-turn mechanism makes opening and closing straightforward. From compact two-way valves to multi-port and actuated models, the range offers different ways to isolate, divert and control flow.
Types of Farpro Ball Valves
Q341 Gear Operated Stainless Steel Flanged Ball Valve
The Q341F gear operated flanged ball valve is a manually operated isolation valve with a stainless steel body and PTFE
Q41F Flanged Floating Ball Valve – Cast Steel
The Q41F is a flanged floating ball valve for quarter-turn isolation in industrial piping. The ball is held between its
Buried Fully Welded Ball Valves
The structure of the buried fully welded ball valve is better crafted, easy to install the stem part, especially suitable
Q41F Floating Ball Valves: Materials and Sizes
The Q41F floating ball valve is a flanged isolation valve. Its ball is held between the seats rather than supported
Electric Ball Valve – Q941F
The Q941F is an electrically actuated ball valve for remote operation in industrial piping. An electric actuator turns the ball
Pneumatic Ball Valve Stainless Steel – Q641F
The Q641F combines a stainless steel ball valve with a pneumatic actuator for automated quarter-turn operation. It is suited to
Q347F Trunnion-Mounted Ball Valve – Cast Steel
The Q347F is a cast steel trunnion-mounted ball valve with gear operation. The ball is supported at its rotational axis,
Floating Ball Valve Cast Steel – Q41Ni
Farpro Q41Ni Floating Ball Valve is a type of ball valve that uses a floating ball to control the flow
Trunnion Mounted Ball Valve Cast Steel – Q47Ni
Farpro Valve offers a range of trunnion mounted ball valves that are made from cast steel. These valves are designed
High Pressure Fully Welded Ball Valve
The high pressure fully welded ball valve series are fully welded forged valves that are particularly suitable for the gas
Air Venting Flanged Floating Ball Valve – CARX
CARX air venting floating ball valve is a barrel-shaped valve body, which mainly contains a set of stainless steel floating
Welded Steel Ball Valve – Q61F
One-piece welded steel ball valve Q61F, no external leakage, etc. The ball is machined with very high precision and is
Welded Steel Ball Valve – Q361F
One-piece welded steel ball valve Q361F, no external leakage, etc. The ball is machined with very high precision and is
Underground Fully-welded Ball Valve Pre-incubated
When operating the underground direct buried welded ball valve, the operator does not need to go underground, but only needs
Underground Welded Ball Valve Diffusion Function
When operating the underground welded ball valve diffusion function, the operator does not need to go underground, but only needs
Female/Welding Fully-welded Steel Ball Valve
A fully welded steel ball valve is a type of ball valve that is made entirely of welded steel components.
Single Welding Line Fully Welded Ball Valve
Single welding line fully welded ball valve has many advantages, such as: it is simple in structure, light in weight,
Flanged Ball Valves
Bolted flange connections suit industrial piping and allow the valve to be removed for maintenance.
Welded Ball Valves
Welded connections integrate the valve into the pipeline without bolted end joints.
Floating Ball Valves
Line pressure moves the ball against the downstream seat to form the shut-off seal.
Trunnion-Mounted Ball Valves
The ball is supported at its rotational axis, with the seats providing sealing contact.
Top-Entry Ball Valves
Access through the top of the body provides a different maintenance arrangement from split-body designs.
V-Port Ball Valves
A shaped port changes the opening area as the ball rotates, supporting flow regulation.
Electric Ball Valves
An electric actuator provides remote quarter-turn operation for automated piping systems.
Pneumatic Ball Valves
A compressed-air actuator opens and closes the valve as part of an automated control sequence.
Ball Valve Flow Patterns
Two-way ball valves open or close a single flow path. Three-way and four-way designs route flow between connected lines, making them useful for switching duties and distribution systems. The port arrangement determines which passages are connected in each operating position.
Full-Port Ball Valves
A bore close to the pipe diameter provides a clear flow path when the valve is open.
Two-Way Ball Valves
A single passage provides straightforward isolation between two pipe connections.
Three-Way Ball Valves
Three connections allow flow to be switched or diverted according to the ball’s port arrangement.
Four-Way Ball Valves
Multiple passages connect and switch flow between four pipe connections.
Segmented Ball Valves
A shaped ball segment varies the flow opening as it rotates, providing a construction suited to control duties.
High-Pressure Ball Valves
Dedicated pressure-rated models serve piping duties beyond the range of general-purpose ball valves.
The Most Important Applications and Uses of Ball Valves
Water Systems
Ball valves provide quarter-turn isolation in water distribution, treatment and utility piping.
Oil and Gas
Floating and trunnion-mounted designs provide isolation across different pipeline and facility services.
Pharmaceutical Processing
Ball valves serve process and utility lines, with hygienic applications requiring the appropriate valve construction and surface finish.
Ball Valve Design Features
Ball valves combine a compact shut-off mechanism with a choice of bore sizes, materials and operators. These features make them useful across both manual piping systems and automated processes.
Full-Bore Flow
A full-bore design keeps the passage close to the pipe bore, helping reduce flow restriction when the valve is open.
Quarter-Turn Operation
A 90-degree turn moves the ball between open and closed positions. The same mechanism can be operated by a lever, gearbox or actuator.
Seat Options
The seat provides the sealing surface around the ball. Seat material is an important part of matching a ball valve to its operating temperature and medium.
Body and Trim Materials
Carbon steel and stainless steel options allow the body and internal components to suit different process fluids and working environments.
Power Plant Industry
- Vietnam Shenglong 2*300MW Thermal Power Plant Project
- Thailang TPI PP 150MW Power Plant Project
- Bangladesh Hiraganjie 225MW Combined Cycle Power Plant Project
- South African Tubatse Mine Thermal Furnace Waste Heat Power Generation Project
- Korla 2*350MW Cogeneration Project
- Olese Hydroelectric Power Station Cambodia
Oil&Gas / Petrochemical Suppliers
- Baofeng Energy Group
- China Petroleum Engineering Construction
- SABIC Corporation Indonesia Natural Gas Project
- Geophysical Exploration Project in Saudi Arabia
- Kazakhstan Kolzhan Prospecting Project
- Ghana TEMA Tank Project Fire Valve Purchase
Urban Construction Suppliers
- Poland Krakow Water Transmission Project
- Uzbekistan Tusterrick Pumping Station Project
- Pakistan SK Project
- Angola Nova Ciamangola 5000TPD Project, etc.
Farpro Yuanda supplies ball valves in a range of body materials, connection types and operating arrangements. Browse the models above to compare construction and specifications.
If you are sourcing valves for a project, send us your valve schedule or application details. We can help narrow the range and quote the required models.